How do you prevent water ingress at cable entry points?

Cable entries use sealed glands with rubber grommets positioned at the bottom or side as specified, combined with internal drip channels to route condensation away from equipment.

CUSTOM-BUILT · MOQ 1 PIECE

Custom 24 27 32 Inch Touch Screen Self Ordering Kiosk Enclosure in Resta

Q: How do you quote? What are the payment terms?

Send your requirements and receive a factory-direct quotation within 24 hours. We accept T/T (30% deposit, 70% before shipment), and support FOB, CIF and DDP shipping terms.

Custom sheet metal, not off-the-shelf — built around your exact requirements.

Your RequirementsShare drawings, specs or hand sketches
Free DFM & CADProduction-ready drawings at no cost
Rapid PrototypingFirst sample ships in 7–10 days

Self-service ordering kiosk enclosures are built with a
Every unit balances heavy-duty durability, refined

✓ Free CAD design
✓ IP54–IP55
✓ ±0.1 mm tolerance
✓ ISO 9001 factory
✓ Quote in 24h

Submit Your Drawing Request a Quote دردشة على واتساب

⚙

You Buy Manufacturing Capability, Not A Fixed Product

Every cabinet on this page was built for a specific project. Your dimensions, materials, protection grade, door layout and cable entries are all decided by you — we handle structure design, process planning, fabrication and testing. This page shows what we have done and what we can do for your project.

SPCC cold-rolled steel, 1.2–2.0mm thick
IP54–IP65 protection, salt-spray tested
Precision CNC bending, ±0.1mm tolerance
Full welding + powder coating finish
In-house tooling & stamping capability
One-stop: design → fabrication → assembly

نظرة عامة على المنتج

تدمج عملية تصنيع الغلاف لكشك طلبات الخدمة الذاتية سلسلة من التقنيات الصناعية الدقيقة ، مع الهدف الأساسي لتحقيق مزيج متناغم من المتانة القوية والجاذبية البصرية وتجربة اللمس سهلة الاستخدام.

عملية تشكيل الهيكلية:

عادة ما يستخدم هيكل الهيكل الرئيسي ورقة الصلب المجلفنة SECC عالية الجودة. تخضع هذه المادة لقطع الليزر CNC عالي الدقة للتفريغ ، تليها انحناءات دقيقة متعددة باستخدام فرامل الصحافة CNC. هذه العملية تخلق هيكل أساسي داخلي وحافظة عالية القوة والصلابة. بالنسبة للأسطح المنحنية المعقدة والمكونات الزخرفية ، يتم استخدام صب الحقن. يستخدم البلاستيك الهندسي ABS المقاوم للصدمات ومقاوم الطقس أو PC ABS ، مصبوب في عملية واحدة عالية الحرارة والضغط العالي لضمان السلامة الهيكلية ودقة الأبعاد.

عملية معالجة السطح:

This is the critical step imparting the product’s texture and durability.

المكونات المعدنية: بعد المعالجة المسبقة بما في ذلك إزالة الدهون والفوسفات والتشغيل ، يتم تطبيق طلاء مسحوق كهربائي ثابت آلي. تلتصق طلاء المسحوق بالأسطح المعدنية عن طريق الجذب الكهربائي الثابت ، ثم تعالج في درجات حرارة عالية لتشكيل نهاية ماتي سميكة بشكل موحد ومتصقة للغاية ومقاومة للخدش ومقاومة للتآكل. قد تستخدم النماذج الممتازة ** عمليات الأنوديز ** لإطارات سبيكة الألومنيوم لتحقيق نسيج معدني متفوق ومقاومة للتآكل.

مكونات بلاستيكية: استخدم على نطاق واسع IMD (في العفن ديكور) فيلم في العفن حقن صب. يتم تضمين الأفلام الزخرفية المطبوعة مع شعارات العلامة التجارية وإرشادات التشغيل مباشرة في القالب وتصب كوحدة واحدة مع البلاستيك. هذا يضمن أن الأنماط مقاومة للتآكل ومثبتة بشكل دائم. يتم تطبيق طلاء مضاد للأشعة فوق البنفسجية في نفس الوقت على السطح لمنع تغير اللون من الاستخدام الطويل.

😩 Typical Buyer Pain Points

Enclosure not fitting your screen or internal hardware
Gaps and misalignment around display bezels
Screen glare, overheating or poor ventilation
Public-use wear: scratches, dents, vandalism
Difficult service access increasing maintenance cost
Finish looking cheap against your brand positioning

✅ How SanJun Solves Them

Enclosure engineered around your exact screen and hardware
±0.1 mm precision cutouts for flush bezel fitment
Validated ventilation and thermal provisions
Vandal-resistant structures, reinforced doors and locks
Front or rear service access for fast field maintenance
Premium finishes: powder coat, brushed, anodized, custom colors

★ Our Core Advantage

Free Production-Ready CAD Design

No drawings? No problem. Send your power module specs — our engineers deliver manufacturable CAD drawings free of charge, saving you $500+ in third-party design fees and weeks of engineering time.

Get My Free CAD Design

MOQ 1Piece — Prototype Friendly

± 0.1mmStandard Tolerance

7–10Days to First Prototype

الايزو 9001Certified Factory Direct

What You Can Customize

�Dimensions & Layout

Fully custom sizes matched to your power module, battery bank and maintenance clearance.

🧱Material & Thickness

SPCC, SGCC galvanized, SUS304 or Aluminum 5052; 1.0–3.0 mm per load and budget.

💧Protection Grade

IP54–IP55 sealing packages; upgraded gaskets and glands for harsher environments.

🚪Door & Access

Single / double / front-access / rear-access doors with custom locks and hinges.

🔌Cable Entry

Bottom or side entries, sealed gland positions and sizes to your wiring plan.

🌡️Thermal System

Vents, fans, heat exchangers or AC integration — engineered to your heat load.

Manufacturing Capability & Specifications

Custom Kiosk & Display Enclosure — Capability Range
خيارات المواد	SPCC / SGCC galvanized steel / SUS304 stainless steel / Aluminum 5052
Thickness Range	1.0 – 3.0 mm (per structural load & vandal rating)
Protection Grade	IP54 – IP65 (indoor / semi-outdoor / full outdoor)
معالجة السطح	Powder coating 60–80 μm / brushed / anodized finish
Display Integration	Precision screen cutouts, bezel and tempered glass mounting
Access & Service	Front / rear service doors, gas struts, hidden hinges
إدارة الكابلات	Internal routing channels, gland entries, power compartments
Mounting	Floor-standing / wall-mounted / desktop / pole-mounted
Branding	Silk-screen, logo embossing, custom color matching
Packaging	Export-grade plywood case with anti-rust film

* All parameters are adjustable to your project. Contact us for a tailored engineering proposal.

How We Work With You — From RFQ to Delivery

Step 1 · 24hSend Requirements

Dimensions, module layout, or even a hand sketch — any format works.

Step 2 · FreeEngineering Review

Our engineers review manufacturability and propose structure optimizations.

Step 3 · FreeCAD Design

Production-ready drawings delivered for your confirmation. Unlimited revision until approved.

Step 4 · 7–10dنموذج أولي

First article produced with full QC report and photos for your approval.

Step 5 · 15–25dالإنتاج الضخم

Batch fabrication with in-process inspection at every critical step.

Step 6Delivery & Support

Export plywood packing, FOB/CIF/DDP shipping, 12–24 months warranty.

Quality Control Before Every Shipment

Sealing test — every cabinet verified against IP54–IP55 rating
Dust-proof test — simulates long-term field dust exposure
Coating adhesion check — cross-hatch test on powder coating
Full-dimension verification — against approved CAD drawings
Weld & appearance inspection — seam quality and surface finish

Quality inspection reports and photos are provided with each order, so you can confirm workmanship before the goods leave our factory. Third-party inspection (SGS / TÜV / BV) is welcome.

Request QC Report Sample

Pricing & Trade Terms — No Surprises

⏱Quotation within 24 hours

Send specs → factory-direct quote in one business day. Volume pricing: unit cost typically drops 30–50% at 100+ pcs.

💳Payment

T/T 30% deposit, 70% balance before shipment. Sample orders and long-term partners: flexible terms available.

🚢Shipping

FOB, CIF and DDP supported. Export-grade plywood case with anti-rust film as standard.

🛡Warranty

12–24 months against manufacturing defects. Responsive after-sales with replacement parts support.

Proven in the Field

SanJun Hardware supplies custom kiosk and display enclosures to self-service equipment makers, digital signage brands and system integrators worldwide. Recognized brands trust us with their user-facing hardware — most started with a prototype and scaled to repeat volume orders.

1,800+Kiosk & display enclosures delivered worldwide

0Fitment complaints on those programs to date

100+Custom projects completed per year

أسئلة متكررة

What is the minimum order quantity?

MOQ is 1 piece. We welcome prototype and small-batch orders so you can validate the design before scaling up.

Can you design the cabinet if we don't have drawings?

Yes. Free production-ready CAD drawing design is our core service. Provide your power module dimensions, weight and layout requirements, and our engineers will produce manufacturable drawings for your confirmation.

What drawing formats do you accept?

We accept STEP, IGS, DWG, DXF and PDF sketches. Even a hand sketch with key dimensions is enough to start.

How do you quote? What are the payment terms?

Factory-direct quotation within 24 hours of receiving your requirements. Payment by T/T (30% deposit, 70% before shipment). FOB, CIF and DDP shipping terms supported.

What is the typical lead time?

Samples take 7–10 days; mass production takes 15–25 days depending on quantity and surface treatment requirements.

Can the cabinet achieve IP55 or higher protection?

Yes. Our standard sealing design reaches IP54–IP55, and we can upgrade gaskets, cable glands and door structures for harsher environments.

Do you ship internationally?

Yes, we export worldwide with export-grade plywood packaging, and we support FOB, CIF and DDP shipping terms.