Custom sheet metal, not off-the-shelf — built around your exact requirements.
Every cabinet on this page was built for a specific project. Your dimensions, materials, protection grade, door layout and cable entries are all decided by you — we handle structure design, process planning, fabrication and testing. This page shows what we have done and what we can do for your project.
Rugged materials and safety
The main body of the shell is usually made of high-quality cold-rolled steel or with environmentally friendly plates, and some models will also use a combination of steel and wood materials or aluminum. These materials ensure the durability and impact resistance of the enclosure to withstand the wear and tear of daily use in the teaching environment.
Surface treatments (e.g. antimicrobial powder coating, high temperature powder coating, etc.) are not only delicate to the touch, but also inhibit the growth of bacteria and are easy to clean and disinfect, meeting the hygiene standards of medical grade or educational facilities.
The overall design usually adopts rounded transition corners to avoid accidental bumping caused by sharp corners and enhance the safety factor.
Internal cable management is optimized with dedicated cable routing slots to keep things neat and tidy, as well as to facilitate heat dissipation and maintenance of the equipment.
Ergonomic Lifting Design
Its core feature is the electric lifting system, usually driven by engineering-grade dual motors.
The lifting and lowering process is smooth and quiet, with a rebound protection function in case of obstruction to prevent accidental injuries, safe and reliable.
The height adjustment range can be adapted to users of different heights, making it easy for teachers to switch flexibly between sitting and standing postures and alleviating the fatigue of long hours of instruction. Some models of the display also support angle adjustment to get a better viewing angle.
No drawings? No problem. Send your power module specs — our engineers deliver manufacturable CAD drawings free of charge, saving you $500+ in third-party design fees and weeks of engineering time.
Get My Free CAD DesignFully custom sizes matched to your power module, battery bank and maintenance clearance.
SPCC, SGCC galvanized, SUS304 or Aluminum 5052; 1.0–3.0 mm per load and budget.
IP54–IP55 sealing packages; upgraded gaskets and glands for harsher environments.
Single / double / front-access / rear-access doors with custom locks and hinges.
Bottom or side entries, sealed gland positions and sizes to your wiring plan.
Vents, fans, heat exchangers or AC integration — engineered to your heat load.
| Custom Kiosk & Display Enclosure — Capability Range | |
|---|---|
| Material Options | SPCC / SGCC galvanized steel / SUS304 stainless steel / Aluminum 5052 |
| Thickness Range | 1.0 – 3.0 mm (per structural load & vandal rating) |
| Protection Grade | IP54 – IP65 (indoor / semi-outdoor / full outdoor) |
| Surface Treatment | Powder coating 60–80 μm / brushed / anodized finish |
| Display Integration | Precision screen cutouts, bezel and tempered glass mounting |
| Access & Service | Front / rear service doors, gas struts, hidden hinges |
| Cable Management | Internal routing channels, gland entries, power compartments |
| Mounting | Floor-standing / wall-mounted / desktop / pole-mounted |
| Branding | Silk-screen, logo embossing, custom color matching |
| Packaging | Export-grade plywood case with anti-rust film |
* All parameters are adjustable to your project. Contact us for a tailored engineering proposal.
Dimensions, module layout, or even a hand sketch — any format works.
Our engineers review manufacturability and propose structure optimizations.
Production-ready drawings delivered for your confirmation. Unlimited revision until approved.
First article produced with full QC report and photos for your approval.
Batch fabrication with in-process inspection at every critical step.
Export plywood packing, FOB/CIF/DDP shipping, 12–24 months warranty.
Quality inspection reports and photos are provided with each order, so you can confirm workmanship before the goods leave our factory. Third-party inspection (SGS / TÜV / BV) is welcome.
Request QC Report SampleSend specs → factory-direct quote in one business day. Volume pricing: unit cost typically drops 30–50% at 100+ pcs.
T/T 30% deposit, 70% balance before shipment. Sample orders and long-term partners: flexible terms available.
FOB, CIF and DDP supported. Export-grade plywood case with anti-rust film as standard.
12–24 months against manufacturing defects. Responsive after-sales with replacement parts support.
SanJun Hardware supplies custom kiosk and display enclosures to self-service equipment makers, digital signage brands and system integrators worldwide. Recognized brands trust us with their user-facing hardware — most started with a prototype and scaled to repeat volume orders.
Send your power module specifications — free CAD design and factory-direct quotation within 24 hours.
Get Free Design & Quote
